WiFi

Step 1 – Open the Wi-Fi tab on the right hand portion of your screen

Step 2 – Make sure your Wi-Fi is turned on and select CRC-LENNOX:

Step 3 – Click on Connect:

Step 4 – When the following prompt pops up, continue to connect (you may see this prompt pop up more than once when connecting):

Step 5 – You will then be prompted to enter your credentials. You can find these in your Omnivox under “Documents and Messages”.

Step 7 (Optional) –

You will now be connected, this can be verified by:

Checking the task bar on the bottom to see the Wi-Fi symbol

OR

Seeing the written confirmation under CRC-LENNOX saying “Connected, secured”

Step 1 – Open the network settings, you can use the simple drop-menu shown below and press Open Network Preferences or click directly on CRC-LENNOX:

Step 2 – If you clicked Open Network Preferences, your next step will be to click Advanced:

Accessing Advanced… features will allow you to:

• Sort your networks from most preferable to least
• Select Auto-Join, select to remember all your networks your mac has joined
• “Forget” networks by selecting a network and pressing the – button
• Add networks by pressing the + button

Step 3 – Click on the +

Step 4 – Once you select CRC-LENNOX, you are prompted to enter your username and password. You can find these in your Omnivox under “Documents and Messages”.

**You may be asked to trust the network, this does not mean that the Wi-Fi is unsafe. Once trusted, you will connect**

Step 5 (Optional) – You can verify your internet connection:

Step 1 – Click on the no Wi-Fi icon on the lower right corner of your screen:

Step 2 – Click where it says Not connected:

Step 3 – Click on CRC-LENNOX:

Step 4 – In the new window that appears, make sure that:

1. EAP method is set to PEAP
2. EAP Phase 2 authentication is set to MSCHAPv2.
3. That the Server CA certificate is set to Do not check
4. You’ve entered your username and password. You can find these in your Omnivox under “Documents and Messages”.

*Do not write anything in Subject Match, Subject Alternative Name Match, nor Domain Suffix Match*

Don’t forget to press Connect after entering all info:

After all that, you should be connected.

Here’s how you can verify that you are connected:

Step 1 – Open the Settings:

Step 2 – Access the Wi-Fi Settings:

Step 3 – Look for CRC-LENNOX under Networks and select it to connect:

Step 4 – A prompt will pop-up for you to enter your username and password. You can find these in your Omnivox under “Documents and Messages”.

Step 5 – A pop-up will come up asking if you want to trust the network, select Trust in order to connect:

You should now see confirmation that your phone is now connected as shown below:

Step 1 – Begin by opening the Settings:

Step 2 – Open up the Wi-Fi settings by selecting Connections:

Step 3 – Press on Wi-Fi:

Step 4 – Select CRC-LENNOX to connect.

It should be in the list of available networks:

Step 5 – Enter your credentials to login. You can find these in your Omnivox under “Documents and Messages”.

When connecting, make sure to select the following:

• EAP method ⇒ PEAP
• CA Certificate ⇒ Do not validate / Don’t validate

You should now be connected to the Wi-Fi.

Step 1 – Open the Wi-Fi tab on the right-hand portion of your screen:

Step 2 – Click on the > beside the Wi-Fi symbol (make sure to click the arrow or else you will shut off your Wi-Fi):

Step 3 – Click on Champlain:

Step 4 – If, in the future, you want to connect automatically to the Wi-Fi, make sure the Connect automatically checkbox is checked.

Then, click Connect:

Step 5 – After clicking on Connect, a website will come up asking you to enter your information.

Enter your username and password. You can find these in your Omnivox under “Documents and Messages”.

Click Log In after entering your information:

Step 6 – After logging in, you should be forwarded to a Google Search page.

To make sure you are properly connected, you can open up the Wifi tab again, it should say Connected, open:

Step 1 – Click on the no Wi-Fi icon on the lower right corner of your screen:

Step 2 – Click where it says Not connected:

Step 3 – Click on CHAMPLAIN:

Step 4 –  Enter your username and password. You can find these in your Omnivox under “Documents and Messages”.

Then, click Log In:

If you entered the correct information, you should be transferred to a Google Search page.

If you are connected correctly, it should also show up as Connected under the Wi-Fi name in the settings.

Step 1 – Begin by accessing the settings:

Step 2 – Navigate to the Wi-Fi tab and look for the CHAMPLAIN network under Public Networks:

Step 3 – Once selected, you will be brought to a web page where you will enter your username and password.

You can find these in your Omnivox under “Documents and Messages”.

Step 4 – A pop-up will ask if you want to trust the network. Select Trust in order to connect.

Step 5 – You will automatically be forwarded to a Google page where you can begin browsing.

Step 6 (Optional) – You can verify your internet connection by going back into the Wi-Fi settings:

Step 1 – Begin by opening the Settings:

Step 2 – Navigate to the Connections tab:

Step 3 – Press on Wi-Fi:

Step 4 – The Wi-Fi in Bishop’s buildings available is called CHAMPLAIN.

It should be in the list of Available Networks:

Step 5 – A browser will open up and ask you to enter your credentials.

You can find these in your Omnivox under “Documents and Messages”.

Step 6 (Optional) – You will now be connected to the Wi-Fi.

You can verify via the settings as shown below: